Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Roseville?
Spring replacement in Roseville typically runs $180 to $340 for a standard torsion spring job, with most single-spring replacements landing near the lower end and two-spring setups at the higher end. Torsion spring replacement is the most common spring service we handle here, and it’s usually completed in a single visit. The exact price depends on the spring type, door weight, and whether your cables, rollers, or bearings need attention at the same time.
If your door won’t lift or you heard a loud bang from the garage, a broken spring is almost always the cause. We’re Wright Garage Door Repair, and we service doors and openers from LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That means when we pull up to your Roseville home, we already know your system.
Spring Replacement Cost Breakdown (2026)
Here’s what spring work looks like in the Roseville market this year. These are real ranges we quote, not teaser prices.
| Service | Typical Price Range |
|---|---|
| Torsion spring replacement (single spring) | $180 – $260 |
| Torsion spring replacement (double spring) | $240 – $340 |
| Extension spring replacement (pair) | $180 – $280 |
| Cable repair (when worn or frayed) | $130 – $250 |
| Roller replacement | $110 – $220 |
| Track realignment | $120 – $240 |
| Opener repair (if opener was strained by the spring failure) | $120 – $320 |
| Panel replacement (if a broken spring caused door damage) | $250 – $500 |
What moves the number up or down? Spring type is the biggest factor. Torsion springs, mounted on the header above the door, cost more than extension springs because the tension involved is higher and the job is more involved. Door height matters too, since taller doors need longer, heavier springs. And if your spring failed and the door came down hard, we may find bent panels, a damaged bottom bracket, or a strained opener that adds to the total. We inspect all of it before quoting, so you’re not surprised halfway through.
What Affects Spring Replacement Pricing in Roseville
Roseville homes aren’t all the same, and neither are garage doors. Here’s what actually changes the price when we’re standing in your driveway.
- Spring type and quantity. Torsion vs. extension, single vs. double. Most modern Roseville builds use torsion springs, and many two-car doors run two springs. Replacing both at once costs more upfront but saves you a second service call when the twin fails, which it often does within months of the first.
- Door weight and material. A steel Clopay or Amarr door weighs differently than a wood or composite Wayne Dalton, and springs are matched to that weight. Heavier doors need higher-cycle springs, which cost a bit more but last longer.
- Spring cycle rating. Standard springs are rated around 10,000 cycles. High-cycle springs (up to 25,000 or more) cost more but are worth it for a door you open and close several times a day. We’ll tell you which one fits how you actually use the door.
- Age and condition of hardware. If your cables are frayed, bearings are grinding, or rollers are flat-spotted, it makes sense to address them during the same visit rather than pay for a second trip later. We show you the worn parts before we replace them.
- Roseville’s dry summer heat. Our valley summers push 100°F, and that heat cycle stresses springs over time. It’s one reason we see more spring failures here in late summer and early fall than in cooler months. The right spring rating handles that better than a generic replacement.
- Brand and opener compatibility. A strained LiftMaster or Chamberlain opener after a spring failure may need its own check. Because we service the drive system too, we can confirm whether the motor, trolley, or safety sensors were affected before you drive away with a door that still won’t close right.
If your roller, track, or opener issue looks like the main problem rather than the spring, we can take a look at that too. A full picture beats a guess. You can read more about our garage door repair service if you’re not sure which part is failing.
How to Save on Spring Replacement
You can’t make a spring last forever, but you can keep the job from growing. A few things that actually help:
- Replace both springs together. If you have a two-spring door and one has broken, the other is usually on the same clock. Replacing both in one visit costs less than two separate calls, and you avoid a repeat breakdown two months from now.
- Don’t run the opener on a broken spring. We mean it. Once a spring snaps, the opener is doing all the lifting, which burns out the motor and can bend the door. Stop using it and call us. Protecting the opener can save you $120 to $320 in opener repair on top of the spring itself.
- Schedule a yearly inspection. A quick check catches frayed cables, worn rollers, and spring wear before they fail. Small fixes stay small.
- Ask for a written, itemized quote before work starts. We explain what’s needed and what isn’t, so you can decide. No pressure to add work that isn’t necessary.
- Take advantage of a free estimate. Call (855) 362-1465 and we’ll give you a real number for your door, not a ballpark guess over the phone that grows once we’re on site.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Roseville?
Spring replacement in Roseville costs $180 to $340 for most residential doors, with single torsion springs toward the lower end and double-spring or high-cycle setups at the higher end. Extension springs typically fall in the $180 to $280 range for a pair. Call (855) 362-1465 for an exact quote; estimates are free.
Is it cheaper to repair a spring or replace the whole door?
Repairing or replacing the spring is almost always the cheaper option, at $180 to $340 versus $700 to $2,200 for a new door. A new door only makes sense when the panels are badly damaged, the frame is warped, or the door is past 20 years old and failing in several places at once. We’ll tell you honestly which side of that line you’re on.
Why did my spring break, and can I prevent it?
Springs break from metal fatigue after a set number of cycles, and Roseville’s hot, dry summers speed that up. A standard spring lasts around 10,000 cycles, which for a door you open twice a day works out to roughly 10 to 14 years. You can’t stop the clock, but a high-cycle spring and a yearly inspection will stretch how long you get between replacements.
Can you replace springs the same day?
Most spring replacements are completed in one visit, often the same day you call, because we stock the common spring sizes for the brands we service. A short phone call with your door’s make and model lets us confirm the right springs before we arrive. Call (855) 362-1465 to get on the schedule.
Is it safe to replace a garage door spring myself?
No. Torsion springs hold enough stored tension to cause serious injury, and the winding process requires specific bars and training. The safest move is to leave the door closed and call a professional. That’s exactly the kind of work we do every day. Call (855) 362-1465 and we’ll handle it safely.
The Wright Way on Springs
When you call us, you’re getting a technician who already knows your Clopay door or your LiftMaster opener. We work on both the door mechanics and the drive system under one company name, so you don’t have to call a second vendor when the problem turns out to be the opener instead of the spring. That’s what we mean by doing the job the Wright way: correctly, and completely, the first time.
Spring replacement is a safety-sensitive repair that we handle for Roseville homeowners regularly. We quote you a firm number before we start, we replace what needs replacing, and we don’t leave until the door runs the way it should.
If you’d like to compare a spring repair to a full spring replacement service visit or talk through your door’s symptoms, we’re ready to help.
Call for a Free Estimate
Wright Garage Door Repair offers free estimates on spring replacement and every other repair we do. Whether your door is stuck down, one spring has snapped, or you suspect a LiftMaster or Genie opener is on its way out, we’ll give you a straight answer with real numbers. Call (855) 362-1465 to book your visit and get your garage back to normal.
Pricing reflects the Roseville market as of 2026. Wright Garage Door Repair offers free estimates – call (855) 362-1465.
What Our Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Javier Morales"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Justin Tran"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Nicole Bennett