Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Pasadena, CA
Garage door installation in Pasadena is rarely a simple swap. With thousands of Craftsman bungalows and Spanish Colonial Revival homes built between 1900 and 1930, many garages in the 91101 and 91106 historic districts were built for Model Ts or horse carriages. That means non-standard widths, low headroom, and openings that need custom fitting rather than a stock door. Wright Garage Door Repair has served Pasadena since 2017, and we already know what your home requires. Call (855) 362-1465 for a free estimate on installation, repair, or opener work.
Why Pasadena Homes Are Different
Pasadena’s housing stock shapes every garage door job we take on. The historic core, most of it in the 91101 through 91106 ZIPs, is dense with 1910s and 1920s Craftsman homes. Their garages were detached or tucked behind the house, built narrow for early automobiles, and often retain original wood swing-out or tilt-up doors. Headroom above the opening is frequently under 8 inches, which rules out most residential torsion spring setups and forces a low-clearance track configuration. Many openings are 7 feet wide instead of the modern 8 or 9, and some are under 7 feet tall. When a door is replaced in these districts, it often has to match the character-defining façade, which means wood-look steel or custom panel profiles that complement Craftsman trim or Spanish arch details.
Climate adds a second layer. Pasadena’s summers are hot and dry, with UV levels that warp and fade wood doors and crack weatherstripping within a few seasons. Winter Santa Ana events drive dust into tracks and rollers, and the seasonal temperature swing causes metal parts to expand and seize. During the occasional heavy rain season, failed bottom seals along alley-facing garages in Bungalow Heaven and Madison Heights let water in and accelerate panel rot. All of this means the work is less about bolting on a new door and more about understanding how an old structure and a demanding climate interact.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Main Pasadena Services
Most Pasadena homeowners reach out for two things: a door that has stopped working, or an opener that grinds, reverses, or refuses to respond. Both are covered by one call.
Garage Door Repair in Pasadena
Broken torsion springs, snapped cables, rusted rollers, and sagging tracks are the most common failures we see across Pasadena’s older garages. A spring that lets go on a detached 1920s garage usually has no backup, so the door is stuck shut. Tracks mounted on original wood framing pull loose over time as the wood dries out. Our technicians arrive familiar with Clopay, Amarr, Wayne Dalton, and Craftsman hardware, and we carry the common spring sizes and cable lengths on the truck. If your door is binding, grinding, or won’t stay open, start with Garage Door Repair in Pasadena.
Garage Door Opener Repair in Pasadena
Opener failures are frustrating because they can be electrical, mechanical, or both. In Pasadena’s older homes, we regularly find openers mounted on ceilings with old wiring, plus trolley rails that have loosened after decades of use and seasonal expansion. Chain-drive units get noisy as sprockets wear, belt-drive units slip, and logic boards fail without warning. Since we work on LiftMaster, Chamberlain, Genie, and Craftsman openers daily, we already know your system when we arrive. When the motor hums but nothing moves, or the door reverses for no reason, see Garage Door Opener Repair in Pasadena.
Garage Door Installation in Pasadena
Garage door installation in Pasadena often means working within constraints that newer cities never present. A door that fits a 1921 Craftsman carriage opening in the 91103 area typically cannot be ordered off the shelf. The opening may be 7 feet wide, the headroom above it may be under a foot, and the architecture may require a specific panel look. Our team measures everything before ordering, then installs the door with hardware matched to the opening. For new tracks, panels, springs, and seals, see Garage Door Installation.
Garage Door Replacement
Signs you need it
Splitting or rotted wood panels, rusted-through steel, or a door that no longer operates smoothly even after repairs signal that replacement makes more sense than patching.
What it costs in Pasadena
A full replacement in Pasadena ranges from $700 to $2,200 depending on door size, material, and whether the opening needs custom fitting.
How we do it
We remove the old door and hardware, measure the opening precisely, install new track and springs if needed, then hang and balance the new door.
Garage Door Seal Installation
Signs you need it
Visible daylight under a closed door, water staining on the interior floor, or dried and cracked rubber along the bottom edge mean the seal has failed.
What it costs in Pasadena
Bottom seal replacement in Pasadena runs $110 to $220, including the seal material and labor to fit it to your door width.
How we do it
We pull the old seal from its retainer, cut a new bulb or T-style seal to length, and slide it into place so the bottom edge sits flush against the floor.
What Garage Door Installation Costs in Pasadena
| Item | Typical range in Pasadena |
|---|---|
| New door installation | $700 – $2,200 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
Can you match a door to a 1920s Pasadena façade?
Yes. We custom fit door dimensions first, then match panel profiles and colors to Craftsman or Spanish Revival detailing. The door must fit the opening before it fits the house.
How long does a new door install take in Pasadena?
Most standard installations finish in half a day. Jobs with custom sizing, low headroom, or aged framing may take a full day because we adjust the track and spring configuration to the actual opening.
Brands We Service in Pasadena
We work on Clopay and Amarr doors, plus openers and hardware from Wayne Dalton and Craftsman. Because we stock common replacement parts locally, most repair jobs are completed in one visit. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Pasadena, CA
| Service | Typical range in Pasadena |
|---|---|
| Garage door repair | $150 – $600 |
| Spring repair | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
Prices in Pasadena move upward when we are fitting a non-standard opening, adding low-clearance track, or matching a historic panel design. The price is quoted and agreed before any work starts, and it does not change once we see the door.
Neighborhoods We Serve in Pasadena
We work throughout Pasadena, from the tree-lined streets of Bungalow Heaven and Madison Heights to the mid-century tracts of the 91107 east side and the hillside properties along the foothill edges.
- Bungalow Heaven (91104)
- Madison Heights (91104)
- Old Pasadena (91105)
- San Rafael (91105)
- East Pasadena (91107)
We typically reach most Pasadena addresses within a few hours of your call, depending on the day’s schedule and the exact job.
Service Area – Cities Near Pasadena
Our Pasadena work regularly takes us into the surrounding communities. We serve South Pasadena, CA, San Marino, CA, Altadena, CA, and East Pasadena, CA. If you are in one of these areas and need a door installed or repaired, call for a free estimate.
Serving Pasadena, CA - Our Local Coverage Area
We serve Pasadena and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Pasadena
In most cases, replacing an existing door with a similar style does not require a permit. If you are in a historic district and the door faces the street, Pasadena’s design review rules may apply. We can advise on what your specific project needs.
Yes, this is one of the most common setups we handle in Pasadena. We install low-clearance track and torsion spring configurations that work with under 12 inches of headroom. The door is then balanced to the actual opening, not a generic spec.
No. The quote covers the full job, including the condition of the existing door and hardware. If we discover an unexpected issue, we stop and explain the additional cost before continuing.
If your Pasadena garage door needs repair, a new opener, or full replacement, call Wright Garage Door Repair at (855) 362-1465. We know the old garages, the historic districts, and the doors that fit them.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Pasadena Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Kevin Walsh"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Javier Morales"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Justin Tran